Network Router User Manual

5/26/05 Customizing the Web Auth Login Screen
OL-7426-03
Clearing and Restoring the Cisco WLAN Solution LogoClearing and Restoring the Cisco WLAN Solution Logo
You can delete or restore the Cisco WLAN Solution logo shown in the Default Web Auth Operation
section using the config custom-web weblogo command:
>config custom-web weblogo <disable/enable>
Refer to the Sample Customized Web Auth Login Page
for an example.
Changing the Web TitleChanging the Web Title
You can change the Web Title shown in the Default Web Auth Operation section using the config
custom-web webtitle command:
>config custom-web webtitle <string>
To change the Web Title again, enter the config custom-web webtitle command again with a new
<string>. Refer to the Sample Customized Web Auth Login Page for an example.
To change the Web Title back to the Cisco WLAN Solution default “Welcome to the Cisco WLAN Solution
wireless network”, use the clear webtitle command:
>clear webtitle
Changing the Web MessageChanging the Web Message
You can change the Web Message shown in the Default Web Auth Operation section using the config
custom-web webmessage command:
>config custom-web webmessage <string>
To change the Web Message again, enter the config custom-web webtitle command again with a new
<string>. Refer to the Sample Customized Web Auth Login Page for an example.
To change the Web Message back to the Cisco WLAN Solution default “Cisco WLAN Solution is pleased
to provide the Wireless LAN infrastructure for your network. Please login and put your air space to
work.”, use the clear webmessage command:
>clear webmessage
Changing the LogoChanging the Logo
You can add or change a Logo or other graphic in the right side of the Web Auth Login screen as
described in the Default Web Auth Operation
section using the following instructions.
• Preparing the TFTP Server
• Copying the Logo or Graphic to the TFTP Server
• Downloading the Logo or Graphic
Preparing the TFTP ServerPreparing the TFTP Server
• Make sure you have a TFTP server available for the Logo or Graphic image download.
- If you are downloading through the Service port, the TFTP server MUST be on the same
subnet as the Service port, because the Service port is not routable.
- If you are downloading through the DS (Distribution System) network port, the TFTP
server can be on the same or a different subnet, because the DS port is routable.
• In the CLI, use the ping <IP Address> command to ensure the Cisco Wireless LAN Controller
can contact the TFTP server.
Note: The TFTP server cannot run on the same computer as the Cisco Wireless
Control System, because the Cisco WCS and the TFTP server use the same commu-
nication port.