Network Router User Manual

5/26/05 Customizing the Web Auth Login Screen
OL-7426-03
• The Web Message “Cisco WLAN Solution is pleased to provide the Wireless LAN infrastructure
for your network. Please login and put your air space to work.”
• A blank area on the right side of the screen for a user-supplied Logo or other graphic.
The Cisco WLAN Solution logo, Web Title, Web Message, and Logo can be customized for each Cisco
WLAN Solution as described in the Customizing Web Auth Operation
section.
When the client has entered a valid username and password, Operating System typically displays some
version of the following Login Successful page, and then redirects the authenticated client to the
originally-requested URL.
Figure - Default Login Successful Screen
Note that the Default Login Successful Screen contains a pointer to the operator-defined Virtual
Gateway Address URL, redirect https://1.1.1.1/logout.html. This redirect is defined by the Virtual
Gateway IP Address parameter (1.1.1.1) entered while Using the Startup Wizard, as the Virtual
Gateway Address in the Interfaces
Web User page, or using the config interface create command line
interface (CLI) command.
Also note that the Cisco WLAN Solution operator may want to redirect the authenticated client to a
different URL. This is described in the Customizing Web Auth Operation
section.
Customizing Web Auth OperationCustomizing Web Auth Operation
You can customize Web Auth operation Using the Cisco WLAN Solution CLI commands as follows:
• Clearing and Restoring the Cisco WLAN Solution Logo
• Changing the Web Title
• Changing the Web Message
• Changing the Logo
• Creating a Custom URL Redirect
• Verifying your Web Auth Changes
• Sample Customized Web Auth Login Page