Manualshelf

Network Router User Manual

ManualsBrandsCisco Systems ManualsNetwork RouterProduct Guide Cisco WLAN Solution 3.0 OL-7426-03
101102103104105106107108109110
5/26/05 Configuring the System for SpectraLink NetLink Telephones
OL-7426-03
• The Cisco Wireless LAN Controller reboots. This will take some time, during which Cisco WCS
loses its connection to the Cisco Wireless LAN Controller.
• Verify that the Cisco Wireless LAN Controller is properly configured by navigating to the
Monitor/Troubleshoot/Controller Status/<Cisco Wireless LAN Controller IP
Address>/ 802.11b/g/Stats page.
• On the Stats page, verify that Short Preamble Implemented is set to No, which indicates
that this Cisco Wireless LAN Controller is optimized for SpectraLink NetLink Telephones; if
desired, continue with the Product Guide
.
Note: You can use a CLI session to view the Cisco Wireless LAN Controller reboot
process. When you can log into the Cisco Wireless LAN Controller CLI, continue with
this procedure.