Network Router User Manual

10-19
Cisco WAN Manager User’s Guide
Release 15, Part Number OL-4552-01 Rev. C0, January 27, 2005
Chapter 10 Cisco WAN Manager Operations
Downloading Software and Firmware
• “Monitoring a Download Session on Cisco BPX and Cisco IGX Nodes” section on page 10-17
• “Cisco IGX and Cisco BPX Conventions” section on page 10-19
• “Cisco MGX Conventions” section on page 10-19
• “Managing with the Image Download” section on page 10-20
• “Deleting Images” section on page 10-24
Image Filename Conventions
The naming conventions for the Cisco IGX, Cisco BPX, and Cisco MGX nodes are used for software
images.
Related Topics
• “Cisco IGX and Cisco BPX Conventions” section on page 10-19
• “Cisco MGX Conventions” section on page 10-19
• “Deleting Images” section on page 10-24
Cisco IGX and Cisco BPX Conventions
Cisco IGX and Cisco BPX software images have the following format, for example, Release 9.2.0:
<Release>.img
<9.2.0>.img
<9.2.0>.000
...
<9.2.0>.022
Cisco IGX and Cisco BPX firmware images have the following format:
<FW Release>.img
<A.A.02>.img
Related Topics
• “Image Filename Conventions” section on page 10-19
• “Cisco MGX Conventions” section on page 10-19
• “Deleting Images” section on page 10-24
Cisco MGX Conventions
The following naming convention is used for software images:
<cardtype>_<A>_<B> [<C>_<D>].fw
Replace <cardtype> with the name of the card.
<A>, <B>, <C>, and <D> is a string that contains any combination of numerals and characters.
<A>_<B> <C>_<D> indicates the firmware version number of a given image file. <C> and <D> are
optional. The .fw extension indicates the file is a firmware image.