Network Router User Manual

10-13
Cisco WAN Manager User’s Guide
Release 15, Part Number OL-4552-01 Rev. C0, January 27, 2005
Chapter 10 Cisco WAN Manager Operations
Downloading Software and Firmware
Cisco IGX and Cisco BPX nodes maintain the primary version of the network operating software in
RAM of the active controller card. If redundant controllers are installed, the standby controller maintains
a secondary version, which may or may not be the same release level as the primary. The primary version
of the operating software can typically be the same release level on all nodes in the network.
All Cisco IGX and Cisco BPX card modules also have card and version specific firmware, which is
stored in flash memory on the front card. If applicable, firmware upgrades are downloaded to the switch
controller card, and distributed to the other cards within that switch. Cisco IGX and Cisco BPX nodes
do not provide long-term storage of firmware images on the controller card.
Cisco MGX nodes do not use network-switching software as on the Cisco IGX and Cisco BPX nodes.
The Cisco MGX nodes use firmware that controls shelf and card operation. The Cisco MGX controller
retains a copy of firmware for service modules, and upgrades are downloaded from a management
station.
The TFTP/FTP protocol downloads software and firmware images from the CWM workstation to WAN
switches.
The CWM Image Download downloads software and firmware images, and monitors the download
process.
Note A CWM workstation is not required to download the software images. You can download the software
images using any machine that can run a FTP client/server process.
Locating Switch Images for Downloading
Cisco Connection Online (CCO) provides a web page, WAN Switching Upgrade Planner, which provides
information about the latest Cisco software product. If you have a Cisco Connection Online account, you
can order or download software directly to your system. The URL for CCO software and firmware is
located at
http://www.cisco.com/kobayashi/sw-center/wan/wan-planner.shtml.
The WAN Switching Upgrade Planner web page provides the following links:
Product Information for WAN Switching Products
Release Information for WAN Switching Products
Documentation and Release Notes
Previous Software for WAN Switching Products
Downloading Cisco WAN Switching Software
Downloading Cisco WAN Card Firmware
Related Topics
“Managing with the Configuration Save and Restore Utility” section on page 10-2
“Downloading Software and Firmware” section on page 10-12
“Preparing the Cisco BPX and Cisco IGX Switch to Download Software or Firmware” section on
page 10-14
“Downloading Switch Software or Firmware from the CWM Workstation to a Switch” section on
page 10-18
“Cisco IGX and Cisco BPX Conventions” section on page 10-19
“Cisco MGX Conventions” section on page 10-19