Network Card User Manual
Table Of Contents
- Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS
- Contents
- Preface
- Audience
- Purpose
- Organization
- Conventions
- Related Publications
- Obtaining Documentation
- Obtaining Technical Assistance
- Introduction to the Wireless LAN Adapters
- Parts of the Client Adapter
- Radio Ranges
- Data Transparency and Protocols
- System Configurations
- Coverage Options
- Safety Information
- Unpacking the Client Adapter
- Inserting the Client Adapter into a Computing Device
- Removing the Client Adapter
- Driver Overview
- Windows for Workgroups 3.11 NDIS2 Installation
- DOS NDIS2 Installation
- ODI Driver Installation
- Additional Requirements and Features
- Driver Keywords and Settings
- Site Survey and Link Test
- Loading New Firmware Versions
- DOS Utilities
- Accessing the Latest Troubleshooting Information
- Interpreting the Indicator LEDs
- Technical Specifications
- Channel Sets
- Maximum Power Levels and Antenna Gains
- Manufacturers Federal Communication Commission Declaration of Conformity Statement
- Department of Communications – Canada
- European Community, Switzerland, Norway, Iceland, and Liechtenstein
- Declaration of Conformity for RF Exposure
- Guidelines for Operating Cisco Aironet Wireless LAN Client Adapters in Japan
- Explosive Device Proximity Warning
- Lightning Activity Warning
- Installation Warning
- Circuit Breaker (15A) Warning
4-11
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS
OL-1744-02
Chapter 4 Utilities
DOS Utilities
RADINFO.EXE
Description Displays the card’s radio configuration.
Syntax RADINFO [-pci] [SLOT0|SLOT1] [-BASE <addr>]
Options -pci PCI card startup
SLOTn Identifies the slot in which the card resides.
BASE <addr> Base address for the memory window used to
access the PCMCIA configuration space. This
must point to an unused 2-Kb block in the
host system-memory space.
Standard Options
(Default settings in
brackets)
None
Remarks This is a typical RADINFO information display:
C:>RADINFO
RADINFO Radio Information - Rev 1.47
I/O Base Address: 0x180
Product Code: Mercury
Hardware Version: Rev. B1
Processor Version: A503
Bootblock Revision: Rev. 1.50
Firmware Revision: Rev. 4.23
MAC Address: 04 40 96 47 93 E5
C:\>