Network Card User Manual

4-4
Cisco Aironet Wireless LAN Client Adapters Installation and Configuration Guide for MS-DOS
OL-1744-02
Chapter 4 Utilities
DOS Utilities
Diagnostic Utilities
The following diagnostic utility ships with the drivers:
• PCMCIA.COM—turns the PCMCIA slot on so that the other utilities can access the adapter.
The utility also turns the slot off.
• RADINFO.EXE—displays the adapter’s radio statistics
DOS Utilities Running Environment
The DOS utilities run well under MS-DOS 6.22.
For the PCM350 and LM350 PCMCIA cards, the DOS utilities do not use card and socket services for
configuring the cards; they program the PCMICIA socket directly. Therefore, an 82365-compatible
socket controller is required for proper operation. Many, but not all, socket controllers have this
capability.
Note If a utility program does not run, use the PCMCIA.COM utility to turn the adapter’s slot on. After
you are finished running the utility programs, use PCMCIA.COM to turn the adapter’s slot off.
Layout and Format
Information on each utility in this section is presented in the following format:
Description This section contains a general description of the utility and how it is
used.
Syntax The correct syntax is shown in this section in the following format:
COMMAND [-option] [-option]
Options Available options are listed here with a brief description of their
purpose.
Standard Options
(Default settings in
brackets)
The following options are considered standard options because they are
common to the utilities that require their use:
-p[IO base] IO base address (hex) [380]
-io#|-misa#|-isa# IO type, #={8|16}
-b [membase] Memory base address (hex) [D000:0]
-I [irq] Interrupt request (decimal) [5]
-s [slot] Slot number (decimal) [0]
-365 82365 card startup
-pci PCI card startup;
-nocheck I/O access not tested on startup
Standard options are available when they are displayed as part of the
command or when using the help (-?) option.
Remarks This section contains information about the utility that can help the user.