Network Router User Manual
Table Of Contents
- Router Platform User Interface Reference
- NAT Policy Page
- Router Interfaces Page
- Advanced Interface Settings Page
- AIM-IPS Interface Settings Page
- Dialer Policy Page
- ADSL Policy Page
- SHDSL Policy Page
- PVC Policy Page
- PPP/MLP Policy Page
- AAA Policy Page
- Accounts and Credential s Policy Page
- Bridging Policy Page
- Clock Policy Page
- CPU Policy Page
- HTTP Policy Page
- Console Policy Page
- VTY Policy Page
- Secure Shell Policy Page
- SNMP Policy Page
- DNS Policy Page
- Hostname Policy Page
- Memory Policy Page
- Secure Device Provisioning Policy Page
- DHCP Policy Page
- NTP Policy Page
- 802.1x Policy Page
- Network Admission Control Policy Page
- Logging Setup Policy Page
- Syslog Servers Policy Page
- Quality of Service Policy Page
- BGP Routing Policy Page
- EIGRP Routing Policy Page
- OSPF Interface Policy Page
- OSPF Process Policy Page
- RIP Routing Policy Page
- Static Routing Policy Page
K-91
User Guide for Cisco Security Manager 3.2
OL-16066-01
Appendix K Router Platform User Interface Reference
AAA Policy Page
Prioritized Method List Defines a sequential list of methods to be queried when authorizing a user.
Enter the names of one or more AAA server group objects (up to four), or
click Select to display an Object Selectors, page F-593. Use the up and down
arrows in the object selector to define the order in which the selected server
groups should be used.
The device tries initially to authorize users using the first method in the list.
If that method fails to respond, the device tries the next method, and so on,
until a response is received.
Supported methods include RADIUS, TACACS+, Local, and None.
Note RADIUS uses the same server for authentication and authorization.
Therefore, if you use define a RADIUS method list for
authentication, you must define the same method list for
authorization.
Note If you select None as a method, it must appear as the last method in
the list.
EXEC Authorization settings
Enable CLI/EXEC
Operations
Authorization
When selected, this type of authorization determines whether the user is
permitted to open an EXEC (CLI) session, using the methods defined in the
method list.
When deselected, EXEC authorization is not performed.
Prioritized Method List Defines a sequential list of methods to be queried when authorizing a user.
Enter the names of one or more AAA server group objects (up to four), or
click Select to display an Object Selectors, page F-593. Use the up and down
arrows in the object selector to define the order in which the selected server
groups should be used.
The device tries initially to authorize users using the first method in the list.
If that method fails to respond, the device tries the next method, and so on,
until a response is received.
Command Authorization settings
Filter Enables you to filter the information displayed in the table. For more
information, see Filtering Tables, page 3-24.
Privilege Level The privilege level to which the command authorization definition applies.
Prioritized Method List The method list to use when authorizing users with this privilege level.
Table K-39 AAA Page—Authorization Tab (Continued)