Network Router User Manual
Table Of Contents
- Router Platform User Interface Reference
- NAT Policy Page
- Router Interfaces Page
- Advanced Interface Settings Page
- AIM-IPS Interface Settings Page
- Dialer Policy Page
- ADSL Policy Page
- SHDSL Policy Page
- PVC Policy Page
- PPP/MLP Policy Page
- AAA Policy Page
- Accounts and Credential s Policy Page
- Bridging Policy Page
- Clock Policy Page
- CPU Policy Page
- HTTP Policy Page
- Console Policy Page
- VTY Policy Page
- Secure Shell Policy Page
- SNMP Policy Page
- DNS Policy Page
- Hostname Policy Page
- Memory Policy Page
- Secure Device Provisioning Policy Page
- DHCP Policy Page
- NTP Policy Page
- 802.1x Policy Page
- Network Admission Control Policy Page
- Logging Setup Policy Page
- Syslog Servers Policy Page
- Quality of Service Policy Page
- BGP Routing Policy Page
- EIGRP Routing Policy Page
- OSPF Interface Policy Page
- OSPF Process Policy Page
- RIP Routing Policy Page
- Static Routing Policy Page
Appendix K Router Platform User Interface Reference
PPP/MLP Policy Page
K-80
User Guide for Cisco Security Manager 3.2
OL-16066-01
PPP Dialog Box—PPP Tab
Use the PPP tab of the PPP dialog box to define the types of authentication and
authorization to perform on the PPP connection.
Navigation Path
Go to the PPP Dialog Box, page K-78, then click the PPP tab.
Related Topics
• PPP Dialog Box—MLP Tab, page K-84
Field Reference
MLP tab Defines how to split and recombine sequential datagrams across multiple
logical data links using Multilink PPP (MLP). See PPP Dialog Box—MLP
Tab, page K-84.
OK button Saves your changes locally on the client and closes the dialog box.
Note To save your changes to the Security Manager server so that they are
not lost when you log out or close your client, click Save on the
source page.
Table K-34 PPP Dialog Box (Continued)
Table K-35 PPP Dialog Box—PPP Tab
Element Description
Authentication settings
PPP Encapsulation When selected, indicates that PPP encapsulation is enabled for the selected
interface. This field is read-only.