Network Router User Manual
Table Of Contents
- Router Platform User Interface Reference
- NAT Policy Page
- Router Interfaces Page
- Advanced Interface Settings Page
- AIM-IPS Interface Settings Page
- Dialer Policy Page
- ADSL Policy Page
- SHDSL Policy Page
- PVC Policy Page
- PPP/MLP Policy Page
- AAA Policy Page
- Accounts and Credential s Policy Page
- Bridging Policy Page
- Clock Policy Page
- CPU Policy Page
- HTTP Policy Page
- Console Policy Page
- VTY Policy Page
- Secure Shell Policy Page
- SNMP Policy Page
- DNS Policy Page
- Hostname Policy Page
- Memory Policy Page
- Secure Device Provisioning Policy Page
- DHCP Policy Page
- NTP Policy Page
- 802.1x Policy Page
- Network Admission Control Policy Page
- Logging Setup Policy Page
- Syslog Servers Policy Page
- Quality of Service Policy Page
- BGP Routing Policy Page
- EIGRP Routing Policy Page
- OSPF Interface Policy Page
- OSPF Process Policy Page
- RIP Routing Policy Page
- Static Routing Policy Page
K-79
User Guide for Cisco Security Manager 3.2
OL-16066-01
Appendix K Router Platform User Interface Reference
PPP/MLP Policy Page
Field Reference
Table K-34 PPP Dialog Box
Element Description
Interface The interface on which PPP encapsulation is enabled. Enter the name of an
interface or interface role, or click Select to display an Object Selectors,
page F-593.
The following interface types support PPP:
• Async
• Group-Async
• Serial
• High-Speed Serial Interface (HSSI)
• Dialer
• BRI, PRI (ISDN)
• Virtual template
• Multilink
If the interface role you want is not listed, click the Create button in the
selector to display the Interface Role Dialog Box, page F-464. From here
you can create an interface role object.
You cannot define PPP on:
• Subinterfaces.
• Serial interfaces with Frame Relay encapsulation.
• Virtual template interfaces defined as Ethernet or tunnel types (serial is
supported).
Note You can define only one PPP connection per interface.
Note Deployment might fail if you define PPP on a virtual template that is
also used in an 802.1x policy. See 802.1x Policy Page, page K-179.
PPP tab Defines the type of authentication and authorization to perform on the PPP
connection. See PPP Dialog Box—PPP Tab, page K-80.