Network Router User Manual
Table Of Contents
- Router Platform User Interface Reference
- NAT Policy Page
- Router Interfaces Page
- Advanced Interface Settings Page
- AIM-IPS Interface Settings Page
- Dialer Policy Page
- ADSL Policy Page
- SHDSL Policy Page
- PVC Policy Page
- PPP/MLP Policy Page
- AAA Policy Page
- Accounts and Credential s Policy Page
- Bridging Policy Page
- Clock Policy Page
- CPU Policy Page
- HTTP Policy Page
- Console Policy Page
- VTY Policy Page
- Secure Shell Policy Page
- SNMP Policy Page
- DNS Policy Page
- Hostname Policy Page
- Memory Policy Page
- Secure Device Provisioning Policy Page
- DHCP Policy Page
- NTP Policy Page
- 802.1x Policy Page
- Network Admission Control Policy Page
- Logging Setup Policy Page
- Syslog Servers Policy Page
- Quality of Service Policy Page
- BGP Routing Policy Page
- EIGRP Routing Policy Page
- OSPF Interface Policy Page
- OSPF Process Policy Page
- RIP Routing Policy Page
- Static Routing Policy Page
K-59
User Guide for Cisco Security Manager 3.2
OL-16066-01
Appendix K Router Platform User Interface Reference
PVC Policy Page
PVC Dialog Box—Settings Tab
Use the Settings tab of the PVC dialog box to configure the basic settings of the
PVC, including:
• ID settings.
• Encapsulation settings.
• Whether ILMI and Inverse ARP are enabled.
• The maximum number of PPPoE sessions.
• The static domain (VPN service) name to use for PPPoA.
Navigation Path
Go to the PVC Dialog Box, page K-56, then click the Settings tab.
Related Topics
• PVC Dialog Box—QoS Tab, page K-63
• PVC Dialog Box—Protocol Tab, page K-67
• PVC Advanced Settings Dialog Box, page K-69
• Defining ATM PVCs, page 15-52
OK button Saves your changes locally on the client and closes the dialog box.
Note To save your changes to the Security Manager server so that they are
not lost when you log out or close your client, click Save on the
source page.
Table K-25 PVC Dialog Box (Continued)