Network Router User Manual
Table Of Contents
- Router Platform User Interface Reference
- NAT Policy Page
- Router Interfaces Page
- Advanced Interface Settings Page
- AIM-IPS Interface Settings Page
- Dialer Policy Page
- ADSL Policy Page
- SHDSL Policy Page
- PVC Policy Page
- PPP/MLP Policy Page
- AAA Policy Page
- Accounts and Credential s Policy Page
- Bridging Policy Page
- Clock Policy Page
- CPU Policy Page
- HTTP Policy Page
- Console Policy Page
- VTY Policy Page
- Secure Shell Policy Page
- SNMP Policy Page
- DNS Policy Page
- Hostname Policy Page
- Memory Policy Page
- Secure Device Provisioning Policy Page
- DHCP Policy Page
- NTP Policy Page
- 802.1x Policy Page
- Network Admission Control Policy Page
- Logging Setup Policy Page
- Syslog Servers Policy Page
- Quality of Service Policy Page
- BGP Routing Policy Page
- EIGRP Routing Policy Page
- OSPF Interface Policy Page
- OSPF Process Policy Page
- RIP Routing Policy Page
- Static Routing Policy Page
Appendix K Router Platform User Interface Reference
ADSL Policy Page
K-46
User Guide for Cisco Security Manager 3.2
OL-16066-01
Interface Card
(continued)
• 857 ADSL—Cisco 857 Integrated Service Router with an ADSL
interface.
• 876 ADSL—Cisco 876 Integrated Services Router with an ADSL
interface.
• 877 ADSL—Cisco 877 Integrated Services Router with an ADSL
interface.
• 1801 ADSLoPOTS—Cisco 1801 Integrated Services Router that
provides ADSL over POTS.
• 1802 ADSLoISDN—Cisco 1802 Integrated Services Router that
provides ADSL over ISDN.
Note When discovering from a live device, the correct interface card type
will already be displayed. If you did not perform discovery on a live
device, or if Security Manager cannot detect the type of interface
card installed on the device, this field displays “Unknown”.
Allow bandwidth
change on ATM PVCs
When selected, the router makes dynamic adjustments to VC bandwidth in
response to changes in the overall bandwidth of the Inverse Multiplexing
over ATM (IMA) group defined on the ATM interface.
When deselected, PVC bandwidth must be adjusted manually (using the
CLI) whenever an individual physical link in the IMA group goes up or
down.
Table K-20 ADSL Settings Dialog Box (Continued)