Network Router User Manual
Table Of Contents
- Router Platform User Interface Reference
- NAT Policy Page
- Router Interfaces Page
- Advanced Interface Settings Page
- AIM-IPS Interface Settings Page
- Dialer Policy Page
- ADSL Policy Page
- SHDSL Policy Page
- PVC Policy Page
- PPP/MLP Policy Page
- AAA Policy Page
- Accounts and Credential s Policy Page
- Bridging Policy Page
- Clock Policy Page
- CPU Policy Page
- HTTP Policy Page
- Console Policy Page
- VTY Policy Page
- Secure Shell Policy Page
- SNMP Policy Page
- DNS Policy Page
- Hostname Policy Page
- Memory Policy Page
- Secure Device Provisioning Policy Page
- DHCP Policy Page
- NTP Policy Page
- 802.1x Policy Page
- Network Admission Control Policy Page
- Logging Setup Policy Page
- Syslog Servers Policy Page
- Quality of Service Policy Page
- BGP Routing Policy Page
- EIGRP Routing Policy Page
- OSPF Interface Policy Page
- OSPF Process Policy Page
- RIP Routing Policy Page
- Static Routing Policy Page
Appendix K Router Platform User Interface Reference
ADSL Policy Page
K-44
User Guide for Cisco Security Manager 3.2
OL-16066-01
Tip To choose which columns to display in the table, right-click a column header, then
select Show Columns. For more information about table display options, see
Table Columns and Column Heading Features, page 3-26.
ADSL Settings Dialog Box
Use the ADSL Settings dialog box to configure ADSL settings on a selected ATM
interface.
Note When you configure ADSL settings, we highly recommend that you select the
type of device or interface card on which the ATM interface is defined. ADSL
settings are highly dependent on the hardware. Defining the hardware type in
Security Manager enables proper validation of your configuration for a successful
deployment to your devices.
Navigation Path
Go to the ADSL Policy Page, page K-42, then click the Add or Edit button
beneath the table.
Related Topics
• Defining ADSL Settings, page 15-40
• PVC Policy Page, page K-54