Network Router User Manual
Table Of Contents
- Router Platform User Interface Reference
- NAT Policy Page
- Router Interfaces Page
- Advanced Interface Settings Page
- AIM-IPS Interface Settings Page
- Dialer Policy Page
- ADSL Policy Page
- SHDSL Policy Page
- PVC Policy Page
- PPP/MLP Policy Page
- AAA Policy Page
- Accounts and Credential s Policy Page
- Bridging Policy Page
- Clock Policy Page
- CPU Policy Page
- HTTP Policy Page
- Console Policy Page
- VTY Policy Page
- Secure Shell Policy Page
- SNMP Policy Page
- DNS Policy Page
- Hostname Policy Page
- Memory Policy Page
- Secure Device Provisioning Policy Page
- DHCP Policy Page
- NTP Policy Page
- 802.1x Policy Page
- Network Admission Control Policy Page
- Logging Setup Policy Page
- Syslog Servers Policy Page
- Quality of Service Policy Page
- BGP Routing Policy Page
- EIGRP Routing Policy Page
- OSPF Interface Policy Page
- OSPF Process Policy Page
- RIP Routing Policy Page
- Static Routing Policy Page
Appendix K Router Platform User Interface Reference
AIM-IPS Interface Settings Page
K-34
User Guide for Cisco Security Manager 3.2
OL-16066-01
AIM-IPS Interface Settings Page
Use the AIM-IPS Interface Settings page to define the settings on the Cisco
Intrusion Prevention System Advanced Integration Module. You can install
AIM-IPS in Cisco 1841, 2800 series, and 3800 series routers.
Note AIM-IPS must be running IPS 6.0 or later.
Caution Cisco IOS IPS and the Cisco IPS AIM cannot be used together. Cisco IOS IPS
must be disabled when the AIM IPS is installed.
Navigation Path
• (Device view) Select Interfaces > Settings > AIM-IPS from the Policy
selector.
• (Policy view) Select Router Interfaces > Settings > AIM-IPS from the
Policy Type selector. Right-click AIM-IPS to create a policy, or select an
existing policy from the Shared Policy selector.
Related Topics
• Chapter K, “Router Platform User Interface Reference”
Field Reference
Table K-14 AIM-IPS Interface Settings Page
Element Description
AIM-IPS Interface Settings table
Interface Name A name selected from among available interfaces.
Select button Opens the Interface Selector dialog box.
Fail Over Mode Fail open or fail closed. The default value is fail open.
AIM-IPS Service Module Monitoring Settings table
Filter Enables you to filter the information displayed in the table. For more
information, see Filtering Tables, page 3-24.