Network Router User Manual
Table Of Contents
- Router Platform User Interface Reference
- NAT Policy Page
- Router Interfaces Page
- Advanced Interface Settings Page
- AIM-IPS Interface Settings Page
- Dialer Policy Page
- ADSL Policy Page
- SHDSL Policy Page
- PVC Policy Page
- PPP/MLP Policy Page
- AAA Policy Page
- Accounts and Credential s Policy Page
- Bridging Policy Page
- Clock Policy Page
- CPU Policy Page
- HTTP Policy Page
- Console Policy Page
- VTY Policy Page
- Secure Shell Policy Page
- SNMP Policy Page
- DNS Policy Page
- Hostname Policy Page
- Memory Policy Page
- Secure Device Provisioning Policy Page
- DHCP Policy Page
- NTP Policy Page
- 802.1x Policy Page
- Network Admission Control Policy Page
- Logging Setup Policy Page
- Syslog Servers Policy Page
- Quality of Service Policy Page
- BGP Routing Policy Page
- EIGRP Routing Policy Page
- OSPF Interface Policy Page
- OSPF Process Policy Page
- RIP Routing Policy Page
- Static Routing Policy Page
K-249
User Guide for Cisco Security Manager 3.2
OL-16066-01
Appendix K Router Platform User Interface Reference
OSPF Process Policy Page
OSPF Process Page—Redistribution Tab
Use the OSPF Process Redistribution tab to create, edit, and delete OSPF
redistribution mappings. This includes defining the maximum number of routes
that can be redistributed into OSPF from other protocols or other OSPF processes.
Navigation Path
Go to the OSPF Process Policy Page, page K-243, then click the Redistribution
tab.
Related Topics
• Redistributing Routes into OSPF, page 15-196
• OSPF Process Page—Setup Tab, page K-243
• OSPF Process Page—Area Tab, page K-247
• OSPF Interface Policy Page, page K-236
Authentication The type of authentication used for the area:
• MD5—(Recommended) Uses the MD5 hash algorithm for
authentication.
• Clear Text—Uses clear text for authentication.
• None—No authentication is used.
Note The authentication type must be the same for all routers and access
servers in an area.
OK button Saves your changes locally on the client and closes the dialog box.
Note To save your changes to the Security Manager server so that they are
not lost when you log out or close your client, click Save on the
source page.
Table K-115 OSPF Area Dialog Box (Continued)