Network Router User Manual
Table Of Contents
- Router Platform User Interface Reference
- NAT Policy Page
- Router Interfaces Page
- Advanced Interface Settings Page
- AIM-IPS Interface Settings Page
- Dialer Policy Page
- ADSL Policy Page
- SHDSL Policy Page
- PVC Policy Page
- PPP/MLP Policy Page
- AAA Policy Page
- Accounts and Credential s Policy Page
- Bridging Policy Page
- Clock Policy Page
- CPU Policy Page
- HTTP Policy Page
- Console Policy Page
- VTY Policy Page
- Secure Shell Policy Page
- SNMP Policy Page
- DNS Policy Page
- Hostname Policy Page
- Memory Policy Page
- Secure Device Provisioning Policy Page
- DHCP Policy Page
- NTP Policy Page
- 802.1x Policy Page
- Network Admission Control Policy Page
- Logging Setup Policy Page
- Syslog Servers Policy Page
- Quality of Service Policy Page
- BGP Routing Policy Page
- EIGRP Routing Policy Page
- OSPF Interface Policy Page
- OSPF Process Policy Page
- RIP Routing Policy Page
- Static Routing Policy Page
K-241
User Guide for Cisco Security Manager 3.2
OL-16066-01
Appendix K Router Platform User Interface Reference
OSPF Interface Policy Page
Retransmit Interval The interval between LSA retransmissions (in seconds) over the selected
interface.
The default is 5 seconds. Valid values range from 1 to 65535 seconds.
Note We recommend that you increase this value for serial lines and
virtual links.
Dead Interval The interval (in seconds) after which an interface declares its neighbor dead
if no hello packets are received. Valid values range from 1 to 655335
seconds.
Note The value of the dead interval is typically the hello interval value
multiplied by 4. The dead interval must be the same for all routers
and access servers in the network.
Table K-110 OSPF Interface Dialog Box (Continued)