Network Router User Manual
Table Of Contents
- Router Platform User Interface Reference
- NAT Policy Page
- Router Interfaces Page
- Advanced Interface Settings Page
- AIM-IPS Interface Settings Page
- Dialer Policy Page
- ADSL Policy Page
- SHDSL Policy Page
- PVC Policy Page
- PPP/MLP Policy Page
- AAA Policy Page
- Accounts and Credential s Policy Page
- Bridging Policy Page
- Clock Policy Page
- CPU Policy Page
- HTTP Policy Page
- Console Policy Page
- VTY Policy Page
- Secure Shell Policy Page
- SNMP Policy Page
- DNS Policy Page
- Hostname Policy Page
- Memory Policy Page
- Secure Device Provisioning Policy Page
- DHCP Policy Page
- NTP Policy Page
- 802.1x Policy Page
- Network Admission Control Policy Page
- Logging Setup Policy Page
- Syslog Servers Policy Page
- Quality of Service Policy Page
- BGP Routing Policy Page
- EIGRP Routing Policy Page
- OSPF Interface Policy Page
- OSPF Process Policy Page
- RIP Routing Policy Page
- Static Routing Policy Page
Appendix K Router Platform User Interface Reference
Router Interfaces Page
K-24
User Guide for Cisco Security Manager 3.2
OL-16066-01
Interface Auto Name Generator Dialog Box
Use the Interface Auto Name Generator dialog box to have Security Manager
generate a name for the interface based on the interface type and its location in
the router.
Navigation Path
Go to the Create Router Interface Dialog Box, page K-18, select Interface from
the Type list, then click Select in the Name field.
Related Topics
• Generating an Interface Name, page 15-26
• Router Interfaces Page, page K-17
• Basic Interface Settings on Cisco IOS Routers, page 15-20
DLCI Applies only to serial subinterfaces with Frame Relay encapsulation.
Enter the data-link connection identifier to associate with the subinterface.
Valid values range from 16 to 1007.
Note Security Manager configures serial subinterfaces as point-to-point
not multipoint.
Description Additional information about the interface (up to 1024 characters).
Roles The interface roles assigned to this interface. A message is displayed if no
roles have yet been assigned.
OK button Saves your changes locally on the client and closes the dialog box.
Note To save your changes to the Security Manager server so that they are
not lost when you log out or close your client, click Save on the
source page.
Table K-10 Create Router Interface Dialog Box (Continued)