Network Router User Manual
Table Of Contents
- Router Platform User Interface Reference
- NAT Policy Page
- Router Interfaces Page
- Advanced Interface Settings Page
- AIM-IPS Interface Settings Page
- Dialer Policy Page
- ADSL Policy Page
- SHDSL Policy Page
- PVC Policy Page
- PPP/MLP Policy Page
- AAA Policy Page
- Accounts and Credential s Policy Page
- Bridging Policy Page
- Clock Policy Page
- CPU Policy Page
- HTTP Policy Page
- Console Policy Page
- VTY Policy Page
- Secure Shell Policy Page
- SNMP Policy Page
- DNS Policy Page
- Hostname Policy Page
- Memory Policy Page
- Secure Device Provisioning Policy Page
- DHCP Policy Page
- NTP Policy Page
- 802.1x Policy Page
- Network Admission Control Policy Page
- Logging Setup Policy Page
- Syslog Servers Policy Page
- Quality of Service Policy Page
- BGP Routing Policy Page
- EIGRP Routing Policy Page
- OSPF Interface Policy Page
- OSPF Process Policy Page
- RIP Routing Policy Page
- Static Routing Policy Page
K-237
User Guide for Cisco Security Manager 3.2
OL-16066-01
Appendix K Router Platform User Interface Reference
OSPF Interface Policy Page
Tip To choose which columns to display in the table, right-click a column header, then
select Show Columns. For more information about table display options, see
Table Columns and Column Heading Features, page 3-26.
Key ID The identification number of the authentication key used for MD5
authentication.
Cost The cost of sending packets over the selected interface, if this value is
different from the cost as normally calculated.
Priority The priority of the selected interface.
MTU Ignore Indicates whether Maximum Transmission Rate (MTU) detection is disabled
on the selected interface.
Database Filter Indicates whether link-state advertisement (LSA) flooding is disabled on the
selected interface.
Hello Interval The interval between hello packets (in seconds) sent over this interface.
Transmit Delay The amount of time OSPF waits (in seconds) before flooding an LSA over
the link.
Retransmit Interval The interval between LSA retransmissions (in seconds) over the selected
interface.
Dead Interval The interval OSPF waits (in seconds) before declaring a neighboring router
dead because of an absence of hello packets.
Network Type The network type configured for the selected interface, if it differs from the
default medium.
Add button Opens the OSPF Interface Dialog Box, page K-238. From here you can
define the properties of an OSPF interface.
Edit button Opens the OSPF Interface Dialog Box, page K-238. From here you can edit
the properties of the selected OSPF interface.
Delete button Deletes the selected OSPF interface definitions from the table.
Save button Saves your changes to the Security Manager server but keeps them private.
Note To publish your changes, click the Submit icon on the toolbar.
Table K-109 OSPF Interface Page (Continued)