Network Router User Manual
Table Of Contents
- Router Platform User Interface Reference
- NAT Policy Page
- Router Interfaces Page
- Advanced Interface Settings Page
- AIM-IPS Interface Settings Page
- Dialer Policy Page
- ADSL Policy Page
- SHDSL Policy Page
- PVC Policy Page
- PPP/MLP Policy Page
- AAA Policy Page
- Accounts and Credential s Policy Page
- Bridging Policy Page
- Clock Policy Page
- CPU Policy Page
- HTTP Policy Page
- Console Policy Page
- VTY Policy Page
- Secure Shell Policy Page
- SNMP Policy Page
- DNS Policy Page
- Hostname Policy Page
- Memory Policy Page
- Secure Device Provisioning Policy Page
- DHCP Policy Page
- NTP Policy Page
- 802.1x Policy Page
- Network Admission Control Policy Page
- Logging Setup Policy Page
- Syslog Servers Policy Page
- Quality of Service Policy Page
- BGP Routing Policy Page
- EIGRP Routing Policy Page
- OSPF Interface Policy Page
- OSPF Process Policy Page
- RIP Routing Policy Page
- Static Routing Policy Page
Appendix K Router Platform User Interface Reference
EIGRP Routing Policy Page
K-234
User Guide for Cisco Security Manager 3.2
OL-16066-01
EIGRP Redistribution Mapping Dialog Box
Use the EIGRP Redistribution Mapping dialog box to add or edit the properties
of an EIGRP redistribution mapping.
Navigation Path
Go to the EIGRP Page—Redistribution Tab, page K-232, then click the Add or
Edit button beneath the table.
Note You must create at least one EIGRP AS before you can access the EIGRP
Redistribution dialog box. See EIGRP Page—Setup Tab, page K-226.
Related Topics
• Redistributing Routes into EIGRP, page 15-190
Field Reference
Table K-108 EIGRP Redistribution Mapping Dialog Box
Element Description
EIGRP AS Numbers The EIGRP AS into which other routes are being redistributed. You must
select an ID number from the list of EIGRP autonomous systems defined in
the EIGRP Page—Setup Tab, page K-226.
Protocol to Redistribute The routing protocol that is being redistributed:
• Static—Redistributes static routes. You can define a single mapping for
each route.
• EIGRP—Redistributes an EIGRP autonomous system. Enter the AS
number in the displayed field. You can define a single mapping for each
AS.
• BGP—Redistributes a BGP autonomous system. You can define a single
BGP mapping on each device. If you configured a BGP AS in the BGP
Setup tab, the AS number is displayed. Otherwise, a message is
displayed indicating that no BGP AS was defined. See BGP
Page—Redistribution Tab, page K-223.