Network Router User Manual
Table Of Contents
- Router Platform User Interface Reference
- NAT Policy Page
- Router Interfaces Page
- Advanced Interface Settings Page
- AIM-IPS Interface Settings Page
- Dialer Policy Page
- ADSL Policy Page
- SHDSL Policy Page
- PVC Policy Page
- PPP/MLP Policy Page
- AAA Policy Page
- Accounts and Credential s Policy Page
- Bridging Policy Page
- Clock Policy Page
- CPU Policy Page
- HTTP Policy Page
- Console Policy Page
- VTY Policy Page
- Secure Shell Policy Page
- SNMP Policy Page
- DNS Policy Page
- Hostname Policy Page
- Memory Policy Page
- Secure Device Provisioning Policy Page
- DHCP Policy Page
- NTP Policy Page
- 802.1x Policy Page
- Network Admission Control Policy Page
- Logging Setup Policy Page
- Syslog Servers Policy Page
- Quality of Service Policy Page
- BGP Routing Policy Page
- EIGRP Routing Policy Page
- OSPF Interface Policy Page
- OSPF Process Policy Page
- RIP Routing Policy Page
- Static Routing Policy Page
K-193
User Guide for Cisco Security Manager 3.2
OL-16066-01
Appendix K Router Platform User Interface Reference
Logging Setup Policy Page
Note We strongly recommend that you define an NTP policy on all routers on which
logging is enabled in order to create accurate timestamps for each log message.
For more information, see NTP Policy Page, page K-174.
Note If you unassign a logging setup policy, the default logging configuration is
restored on the device upon deployment.
Navigation Path
• (Device view) Select Platform > Logging > Logging Setup from the Policy
selector.
• (Policy view) Select Router Platform > Logging > Logging Setup from the
Policy Type selector. Right-click Logging Setup to create a policy, or select
an existing policy from the Shared Policy selector.
Related Topics
• Logging on Cisco IOS Routers, page 15-144
• Syslog Servers Policy Page, page K-197
• NTP on Cisco IOS Routers, page 15-124
• Chapter K, “Router Platform User Interface Reference”
• Understanding Interface Role Objects, page 9-132
Field Reference
Table K-86 Logging Setup Page
Element Description
Enable Logging When selected, logging is enabled on the device.
When deselected, logging is disabled on the device. This is the default.
Tip To use the device’s default logging settings, select the Enable
Logging check box, then click Save, without entering additional
values.