Network Router User Manual

Octal-Port DMT ATU-C Line Card
alarms
12
Cisco IOS Release 12.1(6)DA
Note The alarms command has no effect on critical alarms, major alarms, or minor alarms related to
subsystems other than the DSL subscriber ports.
Examples In this example, the command enables alarms for the default profile:
DSLAM# configure terminal
DSLAM(config)# dsl-profile default
DSLAM(config-dsl-prof)# alarms
Related Commands Command Description
dsl-profile profile name Select an existing DSL profile for modification.
show dsl interface atm slot#/port# Display DSL, DMT, and ATM status for a port.
show dsl profile Display a specific profile, all ports to which the profile
is currently attached, and those port settings.
show facility-alarm status Display the current major and minor alarm status, if any,
and display the configuration of the alarm thresholds.