user manual

ManualsBrandsCisco Systems ManualsNetwork RouterNetwork Router VPN 5000

xiii

Cisco VPN 5000 Concentrator Software Configuration Guide, Software Version 6.0.x

OL-1287-01

About This Guide

This preface defines the objectives, audience, organization, and conventions used

in this guide, and gives instructions for obtaining technical assistance and

additional information.

Objectives

The purpose of this guide is to help you configure the Cisco VPN 5000 series

concentrators for the most common scenarios using the command line interface or

by editing a configuration using a text editor. It does not cover every feature, but

describes those tasks most commonly required for configuration.

Summary of content (8 pages)

PAGE 1
About This Guide This preface defines the objectives, audience, organization, and conventions used in this guide, and gives instructions for obtaining technical assistance and additional information. Objectives The purpose of this guide is to help you configure the Cisco VPN 5000 series concentrators for the most common scenarios using the command line interface or by editing a configuration using a text editor.
PAGE 2
About This Guide Audience • Cisco VPN 5002 Concentrator FRU Installation and Replacement Notes • Cisco VPN 5008 Concentrator FRU Installation and Replacement Notes • Regulatory Compliance and Safety Information for the Cisco VPN 5001 Concentrator • Regulatory Compliance and Safety Information for the Cisco VPN 5002 and 5008 Concentrators Audience This guide is intended primarily for the following audiences: • Customers with technical networking background and experience • System administrators w
PAGE 3
About This Guide Document Conventions • Chapter 7, “Configuring the IKE Policy for IPSec Tunnel Security,” tells you how to configure VPN tunnel security for IPSec clients and LAN-to-LAN tunnels. • Chapter 8, “Configuring VPN Groups,” tells you how to create VPN groups for use with the VPN 5000 client or L2TP client. • Chapter 9, “Authenticating VPN Users,” describes systems you can use to authenticate users for VPN groups.
PAGE 4
About This Guide Obtaining Documentation Caution Means reader be careful. In this situation, you might do something that could result in equipment damage or loss of data. Obtaining Documentation The following sections explain how to obtain documentation from Cisco Systems. World Wide Web You can access the most current Cisco documentation on the World Wide Web at the following URL: http://www.cisco.com Translated documentation is available at the following URL: http://www.cisco.
PAGE 5
About This Guide Obtaining Documentation Ordering Documentation Cisco documentation is available in the following ways: • Registered Cisco Direct Customers can order Cisco product documentation from the Networking Products MarketPlace: http://www.cisco.com/cgi-bin/order/order_root.pl • Registered Cisco.com users can order the Documentation CD-ROM through the online Subscription Store: http://www.cisco.com/go/subscription • Nonregistered Cisco.
PAGE 6
About This Guide Obtaining Technical Assistance Obtaining Technical Assistance Cisco provides Cisco.com as a starting point for all technical assistance. Customers and partners can obtain documentation, troubleshooting tips, and sample configurations from online tools by using the Cisco Technical Assistance Center (TAC) Web Site. Cisco.com registered users have complete access to the technical support resources on the Cisco TAC Web Site. Cisco.com Cisco.
PAGE 7
About This Guide Obtaining Technical Assistance Inquiries to Cisco TAC are categorized according to the urgency of the issue: • Priority level 4 (P4)—You need information or assistance concerning Cisco product capabilities, product installation, or basic product configuration. • Priority level 3 (P3)—Your network performance is degraded. Network functionality is noticeably impaired, but most business operations continue.
PAGE 8
About This Guide Obtaining Technical Assistance Cisco TAC Escalation Center The Cisco TAC Escalation Center addresses issues that are classified as priority level 1 or priority level 2; these classifications are assigned when severe network degradation significantly impacts business operations. When you contact the TAC Escalation Center with a P1 or P2 problem, a Cisco TAC engineer will automatically open a case.