user manual

Configuring Headend Broadband Access Router Features
Configuring and Activating Baseline Privacy
MC-563
Cisco IOS Multiservice Applications Configuration Guide
Verifying KEK Privacy
To verify the KEK life-time or grace-time values that have been set, enter the show cable privacy kek
command:
CMTS01# show cable privacy kek
Configured KEK life time value = 750000
Configured KEK grace time value = 800
Troubleshooting Tips
To troubleshoot the configuration, make sure you have entered a valid value for grace time or life time.
Configuring TEK Privacy
A grace-time TEK can be set from 300 to 1800 seconds. A life-time TEK can be set from 1800 to
604,800 seconds. If you do not set a TEK value, the defaults are used.
To configure TEK data privacy on the HFC network, use one of the following commands in cable
interface configuration mode:
Verifying TEK Privacy
To verify the TEK life-time or grace-time values that have been set, enter the show cable privacy tek
command:
CMTS01# show cable privacy tek
Configured TEK life time value = 56000
Configured TEK grace time value = 900
Troubleshooting Tips
To troubleshoot the configuration, make sure you have entered a valid value for grace time or life time.
Command Purpose
CMTS01(config-if)# cable privacy tek grace-time seconds
or
CMTS01(config-if)# cable privacy tek life-time seconds
Sets the cable privacy TEK grace time in seconds. Valid
values are from 300 to 1800 seconds. Default = 600.
or
Sets the cable privacy TEK life time in seconds. Valid
values are from 1800 to 604800 seconds.
Default = 43200.