user manual

18-5
Cisco ONS 15600 SDH Procedure Guide, R8.0
October 2007
Chapter 18 DLPs F300 to F399
DLP- F305 Provision Path Trace on Circuit Source and Destination Ports
Step 4 Choose the VC circuit you want to trace, then click Edit.
Step 5 In the Edit Circuit window, click the Show Detailed Map check box at the bottom of the window. A
detailed map of the source and destination ports appears.
Step 6 Provision the circuit source transmit string:
a. On the detailed circuit map, right-click the circuit source port (the square on the left or right of the
source node icon) and choose Edit J1 Path Trace (port) from the shortcut menu. Figure 18-1 shows
an example.
Table 18-1 ONS 15600 SDH Cards for Path Trace
J1 Function Cards
Transmit and Receive ASAP (Gigabit Ethernet ports)
Receive Only ASAP (Optical ports)
OC48/STM16 LR/LH 16 Port 1550
OC48/STM16 SR/SH 16 Port 1310
OC192/STM64 LR/LH 4 Port 1550
OC192/STM64 SR/SH 4 Port 1310
OC192/STM64 4 Port ITU C-Band