user manual

18-28
Cisco ONS 15600 SDH Procedure Guide, R8.0
October 2007
Chapter 18 DLPs F300 to F399
DLP- F329 View ASAP POS Ports Statistics PM Parameters
Step 6 Return to your originating procedure (NTP).
DLP-F329 View ASAP POS Ports Statistics PM Parameters
Step 1 In node view, double-click the ASAP card where you want to view PM counts. The card view appears.
Step 2 Click the Performance > Ethernet > POS Ports > Statistics tabs (Figure 18-6).
Figure 18-6 POS Ports Statistics in the Card View Performance Window
Step 3
Click Refresh. Performance monitoring statistics appear for each port on the card.
Step 4 View the PM parameter names that appear in the Param column. The PM parameter values appear in the
Port # columns. For PM parameter definitions refer to the “Performance Monitoring” chapter in the
Cisco ONS 15600 SDH Reference Manual.
Purpose This task enables you to view POS port PM counts at selected time
intervals on an ASAP card and port to detect possible performance
problems.
Tools/Equipment None
Prerequisite Procedures DLP-F181 Log into CTC, page 16-34
Required/As Needed As needed
Onsite/Remote Onsite or remote
Security Level Retrieve or higher
159562
Statistics tab
Performance tab
POS tab
Card View
Refresh
button
Help
button
Clear
button
Baseline
button
Auto-refresh
menu
6