user manual

ManualsBrandsCisco Systems ManualsNetwork RouterNetwork Router ONS 15600 SDH

111

112

113

114

115

116

117

118

119

120

18-118

Cisco ONS 15600 SDH Procedure Guide, R8.0

October 2007

Chapter 18 DLPs F300 to F399

DLP- F398 Install the CTC Launcher Application from a Release 8.0 Software CD

Step 4 Click Add. The node is added to the SOCKS server list. If you need to remove a node on the list, click

Remove.

Step 5 Repeat Steps 3 and 4 to add all qualified ONS 15600 SDH nodes within the network. All ONS nodes that

have SOCKS proxy enabled and are connected to the LAN should be added.

Step 6 Click Check All Servers. A check is conducted to verify that all nodes can perform as SOCKS servers.

If so, a check is placed next to the node IP address or node name in the SOCKS server list. An X placed

next to the node indicates one or more of the following:

• The entry does not correspond to a valid DNS name.

• The numeric IP address is invalid.

• The node cannot be reached.

• The node can be reached, but the SOCKS port cannot be accessed, for example, a firewall problem

might exist.

Step 7 Click Apply. The list of ONS 15600 SDH nodes, including ones that received an X in Step 6, are added

as SOCKS servers.

Step 8 Click OK to close the Preferences dialog box.

Step 9 Return to your originating procedure (NTP).

DLP-F398 Install the CTC Launcher Application from a Release 8.0 Software CD

Step 1 Insert the Cisco ONS 15454, Cisco ONS 15454 SDH, Cisco ONS 15310-CL, Cisco ONS 15310-MA, or

Cisco ONS 15600 Software Release 8.0 CD into your CD drive.

Step 2 Navigate to the CtcLauncher directory.

Step 3 Save the StartCTC.exe file to a local hard drive.

Step 4 Return to your originating procedure (NTP).

DLP-F399 Install the CTC Launcher Application from a Release 8.0 Node

Purpose This task installs the CTC Launcher from a Release 8.0 software CD.

Tools/Equipment None

Prerequisite Procedures DLP-F181 Log into CTC, page 16-34

Required/As Needed As needed

Onsite/Remote Onsite or remote

Security Level None

Purpose This task installs the CTC Launcher from an ONS 15454 node running

Software R8.0

Tools/Equipment None

Prerequisite Procedures DLP-F181 Log into CTC, page 16-34