user manual

18-111
Cisco ONS 15600 SDH Procedure Guide, R8.0
October 2007
Chapter 18 DLPs F300 to F399
DLP- F393 Change Threshold Settings for STM-N Ports
Step 4 Click Apply.
Step 5 Return to your originating procedure (NTP).
DLP-F393 Change Threshold Settings for STM-N Ports
Note For the default values and domains of user-provisionable card settings, refer to the
"Network Element Defaults" appendix in the Cisco ONS 15600 SDH Reference Manual.
Band (STM-64-4-DWDM card only) Sets
the ITU band (in this case, C-band) for
this card.
C
Wavelength (ASAP and STM-64-4-DWDM card
only) Sets the wavelength frequency
(nm).
ASAP card:
• First Tunable Wavelength
• 1310
• 1550
• 1470
• 1490
• 1510
• 1530
• 1570
• 1590
• 1610
Dense wavelength division multiplexing
(DWDM) PPMs also have the following
options:
• 1530.33 to 1560.61
• ITU spacing
Purpose This task changes threshold settings for STM-N ports.
Tools/Equipment None
Prerequisite Procedures DLP-F181 Log into CTC, page 16-34
Required/As Needed As needed
Onsite/Remote Onsite or remote
Security Level Provisioning or higher
Table 18-6 STM-N Card Line Settings (continued)
Heading Description Options