user manual

38-90
Catalyst 3750 Switch Software Configuration Guide
OL-8550-09
Chapter 38 Configuring IP Unicast Routing
Configuring Protocol-Independent Features
Router(config-router-af)# network 3.3.1.0 mask 255.255.255.0
Router(config-router-af)# end
Displaying Multi-VRF CE Status
You can use the privileged EXEC commands in Table 38-15 to display information about multi-VRF CE
configuration and status.
For more information about the information in the displays, refer to the Cisco IOS Switching Services
Command Reference, Release 12.2.
Configuring Protocol-Independent Features
This section describes how to configure IP routing protocol-independent features. These features are
available on switches running the IP base image or the IP services image; except that with the IP base
image, protocol-related features are available only for RIP. For a complete description of the IP routing
protocol-independent commands in this chapter, see the “IP Routing Protocol-Independent Commands”
chapter of the Cisco IOS IP Command Reference, Volume 2 of 3: Routing Protocols, Release 12.2 from
the Cisco.com page under Documentation > Cisco IOS Software > 12.2 Mainline > Command
References.
These sections contain this configuration information:
• Configuring Distributed Cisco Express Forwarding, page 38-91
• Configuring the Number of Equal-Cost Routing Paths, page 38-92
• Configuring Static Unicast Routes, page 38-92
• Specifying Default Routes and Networks, page 38-94
• Using Route Maps to Redistribute Routing Information, page 38-94
• Configuring Policy-Based Routing, page 38-98
• Filtering Routing Information, page 38-102
• Managing Authentication Keys, page 38-104
Table 38-15 Commands for Displaying Multi-VRF CE Information
Command Purpose
show ip protocols vrf vrf-name Display routing protocol information associated
with a VRF.
show ip route vrf vrf-name [connected] [protocol [as-number]] [list]
[mobile] [odr] [profile] [static] [summary] [supernets-only]
Display IP routing table information associated
with a VRF.
show ip vrf [brief | detail | interfaces] [vrf-name] Display information about the defined VRF
instances.