user manual

Chapter 8 Working with Linksets
Viewing Linkset Information Using a Web Browser
8-70
Cisco Signaling Gateway Manager User Guide
OL-7064-01
SGM Links Detail Table
The SGM Links Detail table displays the following information about links
associated with the selected linkset:
Column Description
SLC Signaling link code (SLC) ID for the link.
Type Type of link. Possible link types are:
• HSL—The link uses the SS7-over-ATM (Asynchronous Transfer Mode)
high-speed protocol.
• SCTPIP—The link uses the Stream Control Transmission Protocol (SCTP)
IP transport protocol.
• Serial—The link uses the serial SS7 signaling protocol.
• Virtual—The link is a virtual link, which connects signaling point instances
running on the same device. SGM does not poll virtual links, nor does it
display real-time data or accounting statistics for virtual links.
Interface Name Primary IP address and interface name of the link. The primary IP address is the
first CS7 local IP address configured in the ITP. For example, if the following IP
addresses are configured in the ITP:
cs7 local-peer 4180
local-ip 128.3.0.77
local-ip 128.3.0.254
Then SGM uses 128.3.0.77 as the primary IP address. If at any time that IP
address is deleted from the ITP configuration, or if a new IP address is added to
the beginning of the list, SGM detects the change and automatically updates this
field to reflect the new primary IP address.
If the link has no interface name, this field is blank.
Ports Local and remote ports for the link.
QoS Quality of service (QoS) class of the link.