user manual

8-49

Cisco Signaling Gateway Manager User Guide

OL-7064-01

Chapter 8 Working with Linksets

Viewing Real-Time Data for a Linkset

BitsSentPerSec or BytesSentPerSec

SGM enables you to view real-time bits-sent-per-second information for the

selected linkset (or bytes-sent-per-second information, if you cleared the Show

Details in Bits Instead of Bytes checkbox in the Preferences Window). To do so,

select the Charts tab in the Statistic Details Window for a Linkset, then select the

BitsSentPerSec or BytesSentPerSec tab. SGM displays the BitsSentPerSec or

BytesSentPerSec chart.

The BitsSentPerSec chart (or BytesSentPerSec chart, if you cleared the Show

Details in Bits Instead of Bytes checkbox in the Preferences Window) contains

the following fields and buttons:

Grid On Superimposes a graphic grid on the chart. The grid can make the data easier

to read.

Grid Off Removes the graphic grid from the chart.

Help Displays online help for the current window.

Field or Button Description

Linkset Drop-down list box used to select the linkset for which data is to be displayed.

By default, data is displayed for the selected linkset. To display data for the

adjacent linkset, select it in this list box.

Time Window (mins) Drop-down list box used to specify the length of time displayed in the Bits

Sent Chart or Bytes Sent Chart.

Valid selections are 1, 2, 5, 10, 20, 40, or 60 minutes. The default selection is

5 minutes.