user manual

Chapter 13 Working with Signaling Gateway Mated Pairs
Viewing Basic Information for Signaling Gateway Mated Pairs
13-8
Cisco Signaling Gateway Manager User Guide
OL-5805-01
The signaling gateway mated pair table contains the following columns:
Column Description
Internal ID Internal ID of the signaling gateway mated pair. The internal ID is a unique ID
for every object, assigned by SGM for its own internal use. It can also be useful
when the TAC is debugging problems.
Name Name of the signaling gateway mated pair.
Mate Name of the node associated with the mate of the signaling gateway mated pair.
Node Name of the node associated with the signaling gateway mated pair.
Congestion Level Indicates whether there is congestion on the signaling gateway mated pair. A
signaling gateway mated pair is congested if it has too many packets waiting
to be sent. This condition could be caused by the failure of an element in your
network.
Possible values for the Congestion Level field are None, indicating no
congestion, and 1 to 7, indicating levels of congestion from very light (1) to
very heavy (7).
Ignored Indicates whether the signaling gateway mated pair is to be included when
aggregating and displaying SGM status information:
• Clear the checkbox to include the signaling gateway mated pair. This is the
default setting.
• Select the checkbox to exclude the signaling gateway mated pair.
This field can be edited by users with authentication level Power User (Level
2) and higher.
Notes Indicates whether there is a note associated with the signaling gateway mated
pair.