user manual

13-29
Cisco Signaling Gateway Manager User Guide
OL-5805-01
Chapter 13 Working with Signaling Gateway Mated Pairs
Viewing Real-Time Data for a Signaling Gateway Mated Pair
Configuration Information
The Configuration Information sub-section contains the following fields:
Status Information
The Status Information sub-section contains the following fields:
Field Description
Type Type of interface, such as Ethernet.
MTU Size, in bytes, of the largest datagram that can be sent or received on the
interface.
Speed (Bits/Sec) Estimate, in bits per second, of the interface's current bandwidth. If the
interface does not vary in bandwidth, or if no accurate estimate can be made,
this field displays the nominal bandwidth.
IP Address IP address corresponding to the media-dependent “physical” address.
IP Mask Subnet mask corresponding to the media-dependent “physical” address.
Physical Address Address of the interface at the protocol layer immediately “below” the
network layer in the protocol stack.
Field Description
ITP Uptime Time the interface has been up, in days, hours, minutes, and seconds.
Admin Status Desired state of the interface. Possible values are:
• Up
• Down
• Testing