user manual

13-27
Cisco Signaling Gateway Manager User Guide
OL-5805-01
Chapter 13 Working with Signaling Gateway Mated Pairs
Viewing Real-Time Data for a Signaling Gateway Mated Pair
Signaling Gateway Mated Pair Statistics Details: Configuration
Data
The information presented in the Signaling Gateway Mated Pair Statistics Details:
Configuration Data section is the same as that presented by the “Signaling
Gateway Mated Pair Details: Configuration Data” section on page 13-15.
Field Description
Poll Interval (secs) New poll interval for the Signaling Gateway Mated Pair Statistics
Details Window, in seconds.
Enter the new poll interval in this field. The valid range is 15 seconds
to an unlimited number of seconds. The default value is 15 seconds.
Current Poll Interval Current poll interval for the Signaling Gateway Mated Pair Statistics
Details Window, in seconds.
Number of Polls Received Total number of polls received since polling began for the Signaling
Gateway Mated Pair Statistics Details Window.
Running Time Total elapsed time since polling began for the Signaling Gateway
Mated Pair Statistics Details Window.
Last Message Date and time of the last poll for the Signaling Gateway Mated Pair
Statistics Details Window.
Poll Counter Mode Displays the current mode for poll counters, and the date and time that
counters were last reset. Possible modes are:
• Since Reboot—Counters display values aggregated since the last
reboot of the ITP, or since ITP last reset the counters.
• Since Last Poll—Counters display values aggregated since the
last poll.
• Since User Reset—Counters display values aggregated since the
last time they were reset by the user.
Reset Counters Opens the SGM Reset Counters Dialog, which enables you to change
SGM poller and counter settings. For more information, see the
“Changing Real-Time Poller and Counter Settings” section on
page 2-72.