user manual

13-19
Cisco Signaling Gateway Manager User Guide
OL-5805-01
Chapter 13 Working with Signaling Gateway Mated Pairs
Viewing Detailed Information for a Signaling Gateway Mated Pair
Local IP Address Information
The Local IP Address Information sub-section contains the following fields:
Field Description
IP Address Local IP address that is being used by the signaling gateway mated pair, or the
primary IP address that is configured for the signaling gateway mated pair, or
both.
The primary IP address is the first CS7 local IP address configured in the ITP.
For example, if the following IP addresses are configured in the ITP:
cs7 local-peer 4180
local-ip 128.3.0.77
local-ip 128.3.0.254
then SGM uses 128.3.0.77 as the primary IP address. If at any time that IP
address is deleted from the ITP configuration, or if a new IP address is added to
the beginning of the list, SGM detects the change and automatically updates this
field to reflect the new primary IP address.
Interface Name Name of the interface to which the IP address is assigned. If the signaling
gateway mated pair has no interface name, this field is blank.
Status Current status of the IP address. Possible values are:
Active (green)—The IP address is currently fully functional.
Inactive (red)—The IP address is not currently functional.
Cfg Indicates whether this local IP address was configured for the signaling gateway
mated pair. Possible values are:
• Yes—This is a configured local IP address.
• (blank)—This is not a configured local IP address.
Actual Indicates whether this local IP address is currently being used by the signaling
gateway mated pair. Possible values are:
• Yes—This IP address is being used by the signaling gateway mated pair.
• (blank)—This IP address is not being used by the signaling gateway mated
pair.