user manual

5-4
Cisco Billing and Measurements Server User’s Guide
OL-3351-01
Chapter 5 Configuring BAMS for BAF Output
Identifying Call Types
Default BAF Structure Codes and Call Types
Table 5-2 defines the default BAF structure codes and call types. The table lists the call categories, call
types, and answered and unanswered structure codes.
Example of BAF Structure Codes and Call Types Created from BAF Provisioning
The following example is a formatted printout of a binary record.
============================== BAF RECORD ================================
(000)Record Length : 97
(00)Hex Identifier : aa
( 0)Structure Code : 40625c
( 1)Call Type : 110c
( 2)Sensor Type : 118c
( 3)Sensor ID : 0012345c
( 4)Record Offce Type : 118c
( 5)Record Offce ID : 0067890c
( 6)Connect Date : 00713c
( 7)Timing Indicator : 00000c
( 8)Study Indicator : 0000000c
( 9)Off Hook Indicator : 0c
(10)Traffic sampld Ind : 0c
(11)Operator Action : 0c
(12)Service Feature : 000c
(13)Originating NPA : 703c
(14)Originating number : 7654321c
(15)Overseas Indicator : 0c
(16)Terminating NPA : 00804c
(17)Terminating number : 7654321c
(18)Connect Time : 1611272c
(19)Elapsed Time : 000000021c
(57)IC/INC Prefix : 00000c
( 6)Carrier Conn Date : 00713c
(18)Carrier Conn Time : 1611260c
(19)Carrier Elpsd Time : 000000020c
(58)IC/INC Call Status : 010c
(83)Trunk Group Number : 38004c
(59)Route Indicator : 1c
(85)Dial Indicator : 0c
(60)ANI/CPN Indicator : 3c
=============== Modules =================
Module 104 (Trunk ID)
Table 5-2 BAF Structure Codes and Call Types
Call Category Call Type Answered Structure Code Unanswered Structure Code
FLAT 1 502 21
MESSAGE 1 20 21
INTRALATA 6 1 2
INTERLATA_ORIG 110 625 625
INTERLATA_TERM 119 625 653
INTERLATA_TANDEM 110 625 625
TOLL_FREE 141 360 –1 (A value of –1 means “do
not generate a record.”)