user manual

Table Of Contents
4-4
User Guide for Internetwork Performance Monitor
OL-11291-01
Chapter 4 Modifying IPM Components
Working With Target Devices
Viewing a List of Defined Targets
After you have defined a device as an IPM target, it appears in the list of defined targets in the Target
Configuration window.
To view a list of defined targets:
Step 1 In the IPM Main Window, select Edit > Configuration.
The Configuration window (Figure 2-3) appears.
Step 2 Click Targets.
The Target Configuration window (Figure 2-4) appears.
The Target Configuration window displays a list of all devices defined as IPM targets. From this window,
you can define a new target, modify an existing target, or delete a target.
Viewing Target Properties
The Target Properties window allows you to view the properties of a defined target.
To view target properties:
Step 1 From the IPM Main Window, select a collector that uses the target device.
Step 2 Select View > Properties.
The Properties Viewer window (Figure 4-6) appears. By default, the Collector Properties window
appears within the Properties Viewer window.
Step 3 Click Target.
The Target Properties window (Figure 4-2) appears.