user manual

3-6
User Guide for Internetwork Performance Monitor
OL-11291-01
Chapter 3 Using IPM to Measure Network Performance
Measuring Network Performance for DLSw
Step 3 Click DLSw.
The DLSw Operation Configuration window (Figure 3-3) appears.
Figure 3-3 DLSw Operation Configuration Window
Step 4
In the Name field, enter a descriptive name to assign to the operation. In the Description field, you can
enter a brief description of the operation, including its purpose.
Step 5 In the Request Payloads field, enter the number of bytes to use for the size of the payload of the request
packet. The default setting is 64 bytes.
Step 6 In the Response Payloads field, enter the number of bytes to use for the size of the payload of the
response packet. The default setting is 64 bytes.
Step 7 Click Add.
IPM adds the newly defined operation to the IPM database.
Step 8 Click Close to close the Configuration window.
For more detailed information about the options available from the DLSw Operation Configuration
window, see the “DLSw Operation Configuration Window” topic in the online help.