user manual
Table Of Contents
- User Guide for Internetwork Performance Monitor
- Contents
- Preface
- Overview of IPM
- Getting Started With IPM
- Using IPM to Measure Network Performance
- Measuring Network Performance for DHCP
- Measuring Network Performance for DLSw
- Measuring Network Performance for DNS
- Measuring Network Performance for HTTP
- Measuring Network Performance for FTP
- Measuring Network Performance for IP
- Measuring Network Performance for SNA
- Measuring Network Performance for TCP
- Measuring Network Performance for UDP
- Measuring Network Performance for Enhanced UDP
- Modifying IPM Components
- Working With Source Devices
- Working With Target Devices
- Working With Operations
- Working With Collectors
- Adding Components Using Seed Files
- Changing IP Addresses
- Setting the Baseline
- Setting IPM Database Preferences
- Setting SNMP Timeout and Retry Environment Variables
- Setting New IPM Server Process Timeout Values
- Setting the DISPLAY Variable in Solaris
- Backing Up or Restoring the IPM Database
- NVRAM Settings
- Managed Source Interface Settings
- Changing Administrative Password
- Changing IPM Database Password
- Working With Message Log Window
- Working With IPM From the CiscoWorks Homepage
- Accessing IPM Data From the CiscoWorks Homepage
- Viewing IPM Server Information
- Importing Devices From Device and Credential Repository
- Downloading the IPM Client
- Viewing Configuration Information
- Viewing Latency Data
- Viewing Jitter Data
- Viewing HTTP Data
- Accessing Software Updates and Additional Information
- IPM FAQs and Troubleshooting Tips
- IPM Command Reference
- SA Agent Feature Mapping
- Glossary
- Index
5-16
User Guide for Internetwork Performance Monitor
OL-11291-01
Chapter 5 Working With IPM From the CiscoWorks Homepage
Viewing Configuration Information
Figure 5-13 Collectors Configuration Report Page
Viewing Path Echo Collector Path Usage Data
You can view the usage percentage for each path in a Path Echo collector’s path list from the CiscoWorks
homepage.
To view path usage data collected by IPM:
Step 1 Select Internetwork Performance Monitor > Reports > Configuration Reports > Collectors.
The Collector Information Report page (Figure 5-13) appears.
Step 2 Select a Path Echo collector in the list and click Path Usage in the Detail column.
The Path Usage page (Figure 5-14) appears, where:
• Path is the specific path in the collector’s path list.
• Count is the number of times the collector has used the path.
• Percentage is the usage percentage for the path. The usage percentage is the Count for this path
divided by the total of all Counts for this path list.
For example, if a Path Echo collector passes through three different paths (p1, p2, and p3) between
its source router and target, and the Counts for those paths are 15, 10, and 5 respectively, then the
Percentage for p1 is 15/(15+10+5)=50%.