user manual

Cisco IOS Software Configuration for the 1-Port Channelized OC-12/STM-4 (DS3) Line Card

How to Configure the 1-Port Channelized OC-12/STM-4 (DS3) Line Card

Cisco IOS Release 12.0(8)S

FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ................

Router

• Use the show protocols command to display the global (system-wide) and interface-specific status

of any configured Level 3 protocol.

• Use the show running-config command to display the currently running configuration in RAM.

Here is an example:

Router# show running-config

Building configuration...

Current configuration:

! No configuration change since last restart

version 12.0

no service pad

service timestamps debug uptime

service timestamps log uptime

no service password-encryption

service internal

clock timezone PST -8

clock summer-time PDT recurring

clock calendar-valid

ip subnet-zero

ip ftp source-interface Ethernet0

ip ftp username anewday

ip ftp password anewday

no ip domain-lookup

ip host apark 201.205.254.254

frame-relay switching

clns routing

controller OC12 1/0

clock source internal

interface Serial 1/0:1

ip address 100.1.1.1 255.255.255.0

no ip directed-broadcast

encapsulation ppp

crc 32

dsu mode kentrox

interface Serial 1/0:2

ip address 100.2.2.2 255.255.255.0

no ip directed-broadcast

dsu mode larscom

dsu bandwidth 30000

(Remainder of displayed text omitted from example.)