user manual

Configuring Support for PBX Signalling Protocols
Configuring Q.SIG PRI Signalling Support
MC-426
Cisco IOS Multiservice Applications Configuration Guide
no logging event link-status
isdn switch-type primary-qsig-master
isdn bchan-number-order ascending
no cdp enable
!
interface Switch0
no ip address
no ip directed-broadcast
encapsulation frame-relay
no fair-queue
!
interface FR-ATM0
no ip address
no ip directed-broadcast
!
interface FR-ATM20
no ip address
no ip directed-broadcast
no ip route-cache
shutdown
!
router rip
network 10.0.0.0
network 144.254.0.0
!
ip classless
!
map-list atm1
!
map-class frame-relay A-relay
frame-relay traffic-rate 256000 1540000
no frame-relay adaptive-shaping
!
line con 0
transport input none
line aux 0
line 2 3
line vty 0 4
login
!
!
voice-port 1/1
!
voice-port 1/2
!
dial-peer voice 1 pots
destination-pattern 2...
port 1/1
!
dial-peer voice 3 pots
destination-pattern 3
port 1/3
!
dial-peer voice 5 pots
destination-pattern 5
port 1/5
!
dial-peer voice 6 pots
destination-pattern 6
port 1/6
!