user manual

3-29
Cisco Aironet 1200 Seres Access Point Software Configuration Guide
OL-2159-05
Chapter 3 Radio Configuration and Basic Settings
Ethernet Configuration
Maximum Multicast Packets/Second
Use this setting to control the number of multicast packets that can pass through the Ethernet port each
second. If you enter 0, the access point passes an unlimited number of multicast packets. If you enter a
number other than 0, the device passes only that number of multicast packets per second.
Default Unicast Address Filter
Use this setting to specify whether the default unicast filter is allowed or disallowed.
Always Unblock Ethernet When STP is Disabled
Use this setting to maintain a bridge link when Spanning Tree Protocol (STP) is disabled. If STP is
enabled, select no.
Optimize Ethernet for
Use this setting to specify how you want the Ethernet link to perform. You have two options:
performance (the default setting) and statistics collection. The performance option causes limited per
station statistics to be returned. The statistics option allows full statistics in more detail to be returned.
Selecting either results in a compromise. However, on a well-designed network, this compromise is
virtually unnoticed.