user manual

Contents

Cisco Aironet 1200 Series Access Point Software Configuration Guide

OL-2159-01

Settings on the AP Radio Advanced Page 3-17

Ethernet Configuration 3-23

Entering Identity Information 3-23

Settings on the Ethernet Identification Page 3-24

Entering Ethernet Hardware Information 3-24

Settings on the Ethernet Hardware Page 3-25

Entering Advanced Configuration Information 3-27

Settings on the Ethernet Advanced Page 3-27

CHAPTER

4 Configuring VLANs 4-1

Entering VLAN Information 4-2

Settings on the VLAN Setup page 4-2

VLAN Summary Status Link 4-3

VLAN (802.1Q) Tagging 4-3

802.1Q Encapsulation Mode 4-3

Maximum Number of Enabled VLAN IDs 4-3

Native VLAN ID 4-3

Single VLAN ID which allows Unencrypted packets 4-4

Optionally allow Encrypted packets on the unencrypted VLAN 4-4

VLAN ID 4-4

VLAN Name 4-4

Existing VLANs 4-4

VLAN Security Policy 4-4

Broadcast Domain Segmentation 4-5

Native VLAN Configuration 4-5

Primary and Secondary SSIDs 4-6

RADIUS-Based VLAN Access Control 4-7

Criteria for Deploying Wireless VLANs 4-8

A Wireless VLAN Deployment Example 4-9

Using the Configuration Screens 4-11

Obtaining and Recording VLAN ID and Setup Information 4-11

Creating and Configuring VLANs on the Access Point 4-11

Creating the Native VLAN 4-11

Creating the Full- and Part-Time VLANs 4-14

Creating the Guest VLAN 4-15

Creating the Maintenance VLAN 4-15

Creating and Configuring the SSIDs 4-16

Enabling VLAN (802.1Q) Tagging and Identifying the Native VLAN 4-19

Creating an SSID for Infrastructure Devices 4-21