user manual

Contents
iv
Cisco Aironet 1200 Series Access Point Software Configuration Guide
OL-2159-01
CHAPTER 2 Using the Management Interfaces 2-1
Using the Web-Browser Interface 2-2
Using the Web-Browser Interface for the First Time 2-2
Using the Management Pages in the Web-Browser Interface 2-2
Navigating Using the Map Windows 2-3
Using the Command-Line Interface 2-4
Preparing to Use a Terminal Emulator 2-4
Connecting the Serial Cable 2-5
Setting Up the Terminal Emulator 2-5
Changing Settings with the CLI 2-5
Selecting Pages and Settings 2-6
Applying Changes to the Configuration 2-7
Using a Telnet Session 2-7
Using SNMP 2-7
Supported MIBs 2-8
CHAPTER 3 Radio Configuration and Basic Settings 3-1
Basic Settings 3-2
Entering Basic Settings 3-3
System Name 3-3
MAC Address 3-3
System Serial Number 3-3
Configuration Server Protocol 3-4
Default IP Address 3-4
Default IP Subnet Mask 3-4
Default Gateway 3-4
Radio Service Set ID (SSID) 3-4
Role in Radio Network 3-4
Radio Network Optimization (Optimize Radio Network For) 3-6
Security Setup Link 3-6
Radio Network Compatibility (Ensure Compatibility With) 3-7
Security Setup Link 3-7
SNMP Admin. Community 3-7
Radio Configuration 3-7
Entering Identity Information 3-8
Settings on the AP Radio Identification Page 3-8
Entering Radio Hardware Information 3-10
Settings on the AP Radio Hardware Page 3-11
Entering Advanced Configuration Information 3-15