user manual

3-3
Cisco Aironet 1200 Seres Access Point Software Configuration Guide
OL-2159-05
Chapter 3 Radio Configuration and Basic Settings
Basic Settings
Entering Basic Settings
The Express Setup page contains the following settings:
• System Name
• MAC Address
• System Serial Number
• Configuration Server Protocol
• Default IP Address
• Default IP Subnet Mask
• Default Gateway
• Radio Service Set ID (SSID)
• Role in Radio Network
• Radio Network Optimization (Optimize Radio Network For)
• Radio Network Compatibility (Ensure Compatibility With)
• Security Setup Link
• SNMP Admin. Community
System Name
The system name appears in the titles of the management system pages and in the access point’s
Association Table page. The system name is not an essential setting, but it helps identify the access point
on your network.
MAC Address
The access point’s Media Access Control (MAC) address appears under the system name. The MAC
address is a unique serial number permanently assigned to the access point’s Ethernet controller. You
cannot change the access point’s MAC address.
System Serial Number
The access point’s serial number appears under the MAC address. The serial number is a unique
identifying number assigned to the access point. You cannot change the access point’s serial number.