user manual

2-8
Cisco Aironet 1200 Series Access Point Software Configuration Guide
OL-2159-05
Chapter 2 Using the Management Interfaces
Using SNMP
Supported MIBs
The access point supports the following MIBs:
• Standard MIB-II (RFC1213-MIB.my)
Supported branches:
– system (1.3.6.1.2.1.1)
– interfaces (1.3.6.1.2.1.2)
– ip (1.3.6.1.2.1.4)
– tcp (1.3.6.1.2.1.6)
– udp (1.3.6.1.2.1.7)
– snmp (1.3.6.1.2.1.11)
To download this MIB, browse to
http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml and click SNMP v1 MIBs.
Scroll down the list of files and select RFC1213-MIB.my.
• Cisco Discovery Protocol MIB (CISCO-CDP-MIB-V1SMI.my)
– Supported branch: ciscoCdpMIB (1.3.6.1.4.1.9.23)
To download this MIB, browse to
http://www.cisco.com/public/sw-center/netmgmt/cmtk/mibs.shtml and click SNMP v1 MIBs.
Scroll down the list of files and select CISCO-CDP-MIB-V1SMI.my.
• Cisco Aironet Access Point MIB (AWC-VLAN-MIB.mib)
– Supported branch: awcVx (1.3.6.1.4.1.522.3)
You can download the latest release of the access point MIB at the following URL:
http://www.cisco.com/public/sw-center/sw-wireless.shtml
• IEEE802dot11-MIB.my:
– Supported branch: ieee802dot11 (1.2.840.10036)
To download this MIB, browse to
ftp://ftp.cisco.com/pub/mibs/v1/IEEE802dot11-MIB-V1SMI.my.