user manual

Index
IN-6
Cisco Aironet 1200 Series Access Point Software Configuration Guide
OL-2159-01
Security Setup page 8-33
user manager 8-32
security, VLAN 4-4
serial number, radio 3-8
server setup
boot server
7-4
FTP 7-10
name server 7-9
routing 7-11
time server 7-2
web server 7-7
session-based WEP key, timeout value 8-19
severity levels 7-18
shared key 8-6
SNMP
Admin. community
3-7
Database Query page 11-3
SNMP Setup page 11-2
supported MIBs 2-8
using to set WEP 8-10
Speed setting 3-25
SSH 11-5
SSID 3-4
for infrastructure devices 4-21
primary and secondary 4-6
standby mode 12-5
Station pages 9-3
statistics 9-8
status indicator 13-32
stop bits 2-5
System Configuration Setup page 10-10
system name 3-3
T
Telnet interface
enabling Telnet
11-5
setup page 11-4
temporal key integrity protocol 3-21
terminal emulator 2-4
TFTP 7-11
timeout per device class setting 7-19
timeout value for session-based WEP keys 8-19
time server
GMT offset
7-3
manually set date and time 7-3
TKIP 8-12
top panel indicators 13-31
tracing packets 13-28
transmit antenna 3-15
transmit power 3-13
U
unicast packets, filtering 5-9
updating firmware 10-2
user management
capabilities
8-34
creating list of authorized users 8-33
user information 8-33
using 11-5
V
vendor class identifier 7-7
VLAN
enabling tagging
4-19
native,identifying 4-19
native,mapping to SSID 4-21
security 4-4
VLAN (802.1Q) Tagging setting 4-3
VLAN configuration
802.1Q Encapsulation Mode
4-3
broadcast domain segmentation 4-5
creating and configuring on access point 4-11
creating and configuring SSIDs 4-16
creating native VLAN 4-11