user manual

C-27
Cisco Aironet 1200 Series Access Point Software Configuration Guide
OL-2159-05
Appendix C Event Log Messages
Message Descriptions
System Fatal BKeyXmit NO MIB access,
BKey rotation stopped for
VLAN vlanID.
vlanID: numeric VLAN
identifier
BKR_XMIT_
NOMIB
Correct the system
configuration and reboot the
access point.
System
Warning
BKeyXmit radio is not OK BKR_XMIT_
RADIO_BAD
Correct the radio configuration
and reboot the access point.
Protocol
Warning
VLAN (802.1Q) Tagging is
Enabled, but no Native VLAN is
Enabled
VLAN_NO_
NATIVE
Configure a native VLAN on the
access point.
Protocol
Warning
Unencrypted traffic is
disallowed for VLAN vlanName,
ID vlanID, but configuration
does not guarantee an encryption
mechanism
vlanName: textual VLAN name
vlanID: numeric VLAN
identifier
VLAN_UNENC_
TRAF
Check that the access point
VLAN configuration is
complete.
Protocol
Warning
The user from Station host is not
allowed Association via SSID
ssidIdx
host: host MAC address
ssidIdx: numeric SSID index
STA_
DISALLOW_
SSID
None.
Protocol
Warning
Default VLAN vlanID, for
Infrastructure SSID ssidIdx is
not enabled
vlanID: numeric VLAN
identifier of default VLAN
ssidIdx: numeric Infrastructure
SSID index
VLAN_INFRA_
DISABLED
Check the VLAN configuration
on the access point.
Protocol
Warning
Default VLAN vlanID, for
Infrastructure SSID is not the
Native VLAN nativeVlanID
vlanID: numeric VLAN
identifier of default VLAN
nativeVlanID: numeric VLAN
identifier of Native VLAN
VLAN_INFRA_
NOT_NATIVE
This message might appear if a
bridge on the wireless LAN is in
workgroup bridge mode. Check
the VLAN configuration on the
access point.
Table C-1 Event Log Messages and Descriptions (continued)
Severity Event Description
EMBLEM
Mnemonic
Possible Cause or
Recommended Action