user manual

C-25
Cisco Aironet 1200 Series Access Point Software Configuration Guide
OL-2159-05
Appendix C Event Log Messages
Message Descriptions
System Fatal BKey1Proc's semBCreate
returns error
BKR_KEY1_
LOCKERR
Correct the system
configuration and reboot the
access point.
System
Warning
BKey1Proc:forwardTbl pointer
is NULL
BKP_FTBL_ERR Correct the radio configuration
and reboot the access point.
System
Warning
BKey1Proc:current interface
pointer is NULL
BKP_INF_PTR_
ERR
Correct the system
configuration and reboot the
access point.
System
Warning
BKey1Proc:currIface pointer's
IfEND is NULL
BKP_INF_
ENDPTR_ERR
Correct the system
configuration and reboot the
access point.
System
Warning
BKey1Proc Too many radio
interfaces to process
BKR_MANY_
RADIOS
Correct the system
configuration and reboot the
access point.
System
Warning
BKey1Proc:DB_dot11PHYType
instance is NULL
BKP_INF_
PHYINST_ERR
Correct the radio configuration
and reboot the access point.
System
Warning
BKey1Proc:DB_dot11PHYType
is NULL
BKP_INF_PHY_
ERR
Correct the radio configuration
and reboot the access point.
System
Warning
BKey1Proc cannot access the
radio ifIndex interface structure.
ifIndex: MIB2 ifIndex of
affected interface
BKR_KEY1_
NORADIOINF
Correct the radio configuration
and reboot the access point.
System
Warning
BKey1Proc cannott access the
radio ifIndex control structure.
ifIndex: MIB2 ifIndex of
affected interface
BKR_KEY1_
NORADIOCTRL
Correct the radio configuration
and reboot the access point.
System
Warning
BKey1Proc Can't access radio
ifIndex Radio802_11_c data.
ifIndex: MIB2 ifIndex of
affected interface
BKR_KEY1_
NODEV80211
Correct the radio configuration
and reboot the access point.
System
Warning
BKey1Proc Can't access radio
ifIndex MIB.
ifIndex: MIB2 ifIndex of
affected interface
BKR_KEY1_
NORADIOMIB
Correct the radio configuration
and reboot the access point.
System
Warning
BKey1Proc Can't access radio
ifIndex AWC_MIB.
ifIndex: MIB2 ifIndex of
affected interface
BKR_KEY1_
NORADIOAMIB
Correct the radio configuration
and reboot the access point.
System
Warning
BKey1Proc current default Key
Index keyIdx and Count are in
conflicting states. Using default
key 0.
keyIdx: WEP key index
BKR_KEY1_
CONFLICT
Correct the system
configuration and reboot the
access point.
Table C-1 Event Log Messages and Descriptions (continued)
Severity Event Description
EMBLEM
Mnemonic
Possible Cause or
Recommended Action