user manual

C-21
Cisco Aironet 1200 Series Access Point Software Configuration Guide
OL-2159-05
Appendix C Event Log Messages
Message Descriptions
System Fatal Rebooting System due to change
in 802.1X Protocol Version
SYS_REBOOT_
1X_VER
None.
System
Information
Hot Standby Enable failed HSTNDBY_EN_
FAILED
Verify the following:
Root access point operation.
Hot standby access point and
root access point configurations
match.
The root and standby access
point link test is successful.
System
Information
Hot Standby Disable failed HSTNDBY_DIS_
FAILED
Verify the following:
Root access point operation.
Hot standby access point and
root access point configurations
match.
The root and standby access
point link test is successful.
System
Information
Hot Standby Enabled
successfully
HSTNDBY_EN_
OK
None.
System
Information
Hotstandby lost its association
with monitored AP
HSTNDBY_
ASSOC_LOST
Verify the following:
Root access point operation.
Hot standby access point and
root access point configurations
match.
The root and standby access
point link test is successful.
System
Information
Hotstandby lost its radio link to
monitored AP
HSTNDBY_RAD
_LOST
Verify the following:
Root access point operation.
Hot standby access point and
root access point configurations
match.
The root and standby access
point link test is successful.
System
Information
Hotstandby lost its ether link to
monitored AP
HSTNDBY_ETH
_LOST
Verify the following:
Root access point operation.
Hot standby access point and
root access point configurations
match.
The root and standby access
point link test is successful.
Table C-1 Event Log Messages and Descriptions (continued)
Severity Event Description
EMBLEM
Mnemonic
Possible Cause or
Recommended Action