user manual

CHAPTER
2-1
Cisco Aironet 1200 Series Access Point Software Configuration Guide
OL-2159-05
2
Using the Management Interfaces
This chapter describes the interfaces you can use to configure the access point. You can use a
web-browser interface, a command-line interface through a terminal emulator or a Telnet session, or a
Simple Network Management Protocol (SNMP) application. The access point’s management system
web pages are organized the same way for the web browser and command-line interfaces. The examples
in this manual show the web-browser interface.
This chapter contains the following sections:
• Using the Web-Browser Interface, page 2-2
• Using the Command-Line Interface, page 2-4
• Using SNMP, page 2-7